Description
Sherline 9/16 (inch) Headstock Assembly 30110
Sherline 9/16 (inch) Headstock Assembly 30110
We opened the spindle through-hole to a maximum of 9/16″ (14.28 mm). While this allows larger stock to pass through the headstock.
It also eliminates the #1 Morse internal taper, meaning tapered tools like drill chucks, fly cutters, etc., cannot be held in the headstock.
Threaded tools can still be used, such as 3 or 4-jaw chucks and end mill holders.
The headstock includes a spindle pulley and a precision ground head key.
NOTE: Certain attachments, like the Thread Cutting Attachment, the Lathe Power Feed, and the 10,000 RPM Pulley Set will NOT work with the 9/16″ Collet Headstock. If you are uncertain if an accessory will work with the 9/16″ Collet Headstock, please call for more information.
Custom Build Your 9/16″ Through-Hole Spindle Headstock with the Following Options:
- Class 3 or Class 5 Bearings
- With or without a DC Motor and Speed Control Unit
NOTE: The 9/16″ spindles DO NOT have electroless nickel plating as an available option
The bearings in the headstocks are offered in two classes: C3 and C5.
The C3 bearings have been the standard in all of our headstocks for years and have proven reliable over that time.
The C5 bearing headstocks come at a higher price than the standard C3 bearings headstocks, but they run smoother, quieter, and cooler than our regular class 3 bearing headstocks and are more suitable in an industrial setting.
