Description
Sherline Oversize 2.5 inch Z Axis Handwheel 3404
Oversize 2.5 inch Z Axis Handwheel
Using a larger handwheel can give a tool a more substantial feel and make cranking easier. These large 2½” handwheels have the same number of graduated markings as the standard 1⅝” or 2″ handwheels but offer a “beefier” feel. They can be used on either the lathe or mill.
NOTE: The Oversize 2½” handwheel is not recommended for use on the lathe tailstock as it will interfere with the leadscrew handwheel if oversize handwheels are used on both.
When upgrading handwheels, consider also the adjustable “zero” handwheels. They are available in 2″ and 2½” diameters and can make keeping track of dimensions easier.
