Description
Sherline 3003 Two-Position Tool Post 1/4 in & 1/4 in
It is not unusual to have to stop and change lathe tools several
times while turning a part on the lathe. The change may be to
switch from a left-hand tool to a right-hand tool, from a
sharp-nosed tool to a radius-tipped tool, or from a roughing tool
to a finishing tool. Whatever the reason, each change requires a
little setup time. This time can be reduced by using a two-position
tool post. Each Sherline two-position tool post mounts two 1/4″
lathe tools. By having one or more of these tool posts with your
favorite lathe tool pre-mounted in them, you can simplify your work
and reduce the time required to change tools.
Other special tool posts are also available:
P/N 3008, 2-position tool post, 5/16″/3/8″ for larger size lathe
tools P/N 3057, Rocker tool post P/N 7600, 3/8″ Insert holder tool
post (3/8″ square and round) P/N 2250, Quick-Change Tool Holder
System
